|
PARTS: Chassis & Wheels |
PRICE |
|
WHEEL AND SWING
ARM BEARINGS AND SEALS
|
|
|
Wheel
bearings 1955-69 twins (each) |
|
|
Wheel bearings R26 R27 and all 1970-84 except R65LS (each) |
|
|
Swing arm
bearing 1955-1980 (each) |
|
|
Swing arm
seal 1955-1980 ground steel outside diameter so as not to pop
out during greasing. |
|
|
Gasket
between the swing arm and final drive 1955-69 only |
|
|
Wheel seal
1955-69 brake drum side all and hub nut side Early. |
|
|
Wheel seal
/2 hub nut side Late (replaces rubber seal on outside of nut)
To distinguish the early from late seal, the seal on the late
style hub nut is visible without removing the wheel from the
bike, to see the early one the nut has to be removed from the
wheel. |
|
|
Wheel seal
R26 and R27 |
|
HEAD (STEERING)
BEARINGS 1970-1995 AIRHEADS AND WE THINK all K BIKES
Replacements for worn (notchy) head (steering) bearings. 2
needed, top and bottom (each). ($20 each in quantity 20 or more)
|
$22 each
|
TAPERED ROLLER
HEAD BEARINGS R26 R27 R51 R61 R66 R71 ALL /2 AND OTHERS as well
as some URALS
That old standby to improve the handling of all Earles Fork
BMWs. These give a more rigid fork-to-frame joint, resulting in
better handling. Also, they will often eliminate a shimmy if you
have one. These are much stronger than those itty bitty balls
that BMW used. No machining required. ($26/set ten or more
sets) |
$32/set
|
ADAPTER SLEEVES
(US) MODELS
These allow the above mentioned bearings to be used on /2
telescopic (US) models. |
|
| |
|
|
FORK TUBES ALL TELESCOPIC EVEN PRE 1955, EVEN NON-BMW
If you find that your fork tubes are bent you can replace them
with these NON-stock, cold drawn, centerless ground, hard chrome
plated exact replacement ones. BMW tubes. |
|
