|
Add:
|
PISTON RINGS, ISETTA 250 & 300
Model:
Price: $60.00
Weight: 0.2lbs
Date Added: Thursday 11 March, 2010
|
|
These aftermarket multi-piece piston rings offer improved sealing over stock. The lower oil control ring is a three-part ring: two thin chrome-plated ... more info |
|
Add:
|
PISTON, ISETTA 250
Model:
Price: $179.00
Weight: 1.2lbs
Date Added: Thursday 11 March, 2010
|
|
Isetta 250 pistons available in standard size and four oversizes (specify size when ordering). These are relatively high (10-12%) Silicon content ... more info |
|
Add:
|
PISTON, ISETTA 300 - 4th OVERSIZE
Model:
Price: $179.00
Weight: 1.3lbs
Date Added: Thursday 11 March, 2010
|
|
These are relatively high (10-12%) Silicon content cast pistons with an expansion rate equivalent to the original ones. For this reason the stock ... more info |
|
Add:
|
PISTON, ISETTA 300 - 3rd OVERSIZE (73.5mm)
Model:
Price: $179.00
Weight: 1.3lbs
Date Added: Thursday 11 March, 2010
|
|
These are relatively high (10-12%) Silicon content cast pistons with an expansion rate equivalent to the original ones. For this reason the stock ... more info |
|
Add:
|
PISTON, ISETTA 300 - 2nd OVERSIZE (73mm)
Model:
Price: $179.00
Weight: 1.3lbs
Date Added: Thursday 11 March, 2010
|
|
These are relatively high (10-12%) Silicon content cast pistons with an expansion rate equivalent to the original ones. For this reason the stock ... more info |
|
Add:
|
PISTON, ISETTA 300 - 1st OVERSIZE (72.5mm)
Model:
Price: $179.00
Weight: 1.3lbs
Date Added: Thursday 11 March, 2010
|
|
These are relatively high (10-12%) Silicon content cast pistons with an expansion rate equivalent to the original ones. For this reason the stock ... more info |
|
Add:
|
PISTON, ISETTA 300 - STANDARD SIZE (72mm)
Model:
Price: $168.00
Weight: 1.3lbs
Date Added: Thursday 11 March, 2010
|
|
These are relatively high (10-12%) Silicon content cast pistons with an expansion rate equivalent to the original ones. For this reason the stock ... more info |
|
Add:
|
HUB NUT REMOVER /6 and /7
Model:
Price: $46.00
Weight: 1lbs
Date Added: Thursday 11 March, 2010
|
|
Tool body that will remove the hub nut from /6, /7, R100S & RS (not the R60/6 or R80/7) motorcycles. It's designed to work even when some bozo has ... more info |
|
Add:
|
WHEEL TUBE /2 and /5
Model:
Price: $9.00
Weight: 0.6lbs
Date Added: Thursday 11 March, 2010
|
|
Tube to aid in removing the wheel bearings, and to pre-load them while checking for correct spacer length. Shown in picture #169 in my copy of the /2 ... more info |
|
Add:
|
DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR
Model:
Price: $18.00
Weight: 0.1lbs
Date Added: Thursday 11 March, 2010
|
|
BMW specifies a torque figure for the twelve sided bolts that hold the drive shaft universal joint onto the output flange of the transmission, but a ... more info |
|
