|
Add:
|
Final Drive Ring Gear Shim - 0.1mm
Model:
Price: $5.00
Weight: 0.1lbs
Date Added: Friday 07 March, 2014
|
|
For R50-R69S |
|
Add:
|
Final Drive Ring Gear Shim - 0.2mm
Model:
Price: $6.00
Weight: 0.1lbs
Date Added: Friday 07 March, 2014
|
|
For R50-R69S |
|
Add:
|
Final Drive Ring Gear Shim Kit
Model:
Price: $25.00
Weight: 0.2lbs
Date Added: Friday 07 March, 2014
|
|
Five shims in any combination of thicknesses you choose. If you don't specify I'll include four 0.2mm shims and one 0.1mm shim. |
|
Add:
|
FINAL DRIVE SLOTTED NUT TOOL - /2 (1955 to 1969)
Model:
Price: $39.00
Weight: 0.7lbs
Date Added: Friday 19 February, 2010
|
|
For /2's 1955-1969 and R66 R51/2 R51/3 R67 R68 but not R26 R27 Used to remove the nut with the four slots that holds the oil seal and the pinion gear ... more info |
|
Add:
|
FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS
Model:
Price: $39.00
Weight: 0.7lbs
Date Added: Thursday 11 March, 2010
|
|
For all airheads 1970-1995 except R100GS. Used to remove the nut with the four slots that holds the oil seal and the pinion gear in place in the ... more info |
|
Add:
|
FLYWHEEL HOLDER 1970 on AIRHEADS
Model:
Price: $14.00
Weight: 0.5lbs
Date Added: Monday 08 February, 2010
|
|
Keeps the flywheel of all 1970 and later airheads from rotating while loosening or tightening the flywheel bolts. It is the same tool used for the ... more info |
|
Add:
|
FLYWHEEL PULLER/HOLDER - 1970 to 1980 AIRHEADS
Model:
Price: $31.00
Weight: 2.5lbs
Date Added: Friday 18 February, 2011
|
|
Heavy duty tool for removing all of the "full" flywheels used on airheads from 1970 to 1980. Also holds the flywheel from turning while you loosen or ... more info |
|
Add:
|
FORK CAP PIN WRENCH
Model:
Price: $22.00
Weight: 0.4lbs
Date Added: Friday 19 February, 2010
|
|
This tool removes the front fork filler caps on US/2's /5 /6 and /7 and the threaded rings used in the bottom of the /2 and some /5 telescopic forks. ... more info |
|
Add:
|
FORK TUBE THREADED RING PIN WRENCH
Model:
Price: $22.00
Weight: 0.5lbs
Date Added: Thursday 08 April, 2010
|
|
Pin wrench that will remove/install the threaded rings in some /5 (the later ones with the smaller diameter pin holes) and all /6 and /7. |
|
Add:
|
FRONT END ALIGNMENT TOOL - PLATE GLASS
Model:
Price: $25.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Plate used to determine if one tube is cocked in front of the other. |
|
