Shopping Cart
0 item(s) - $0.00

Final Drive & Driveshaft




Product Image Item Name+ Price
/5 & LATER PIN SET - SLOTTED NUT TOOL

/5 & LATER PIN SET - SLOTTED NUT TOOL

If you have or have ordered the /2 final drive slotted nut tool you can just purchase this pin set to allow the tool to work on 1970 and later...
$13.00

Add:

41mm SOCKET for FINAL DRIVE SLOTTED NUT TOOL

41mm SOCKET for FINAL DRIVE SLOTTED NUT TOOL

1/2" drive impact socket for driving the slotted nut tool.
$34.00

Add:

DRIVESHAFT COMPRESSOR - POST 1980

DRIVESHAFT COMPRESSOR - POST 1980

Used to compress the spring on the rubber band drive shafts. BMW started to use them about September of 1980. Replaces BMW tool number 26 1 700. The...
$43.00

Add:

DRIVESHAFT COUPLING PULLER 1955-1980

DRIVESHAFT COUPLING PULLER 1955-1980

This removes the piece that couples the drive shaft to the final drive so that you can remove the drive shaft from the swingarm. Replaces Matra 508...
$84.00

Add:

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

BMW specifies a torque figure for the twelve sided bolts that hold the drive shaft universal joint onto the output flange of the transmission, but a...
$18.00

Add:

FINAL DRIVE PINION GEAR HOLDER

FINAL DRIVE PINION GEAR HOLDER

Used to keep the pinion gear from rotating while unscrewing the pinion nut. For 1955 to 1995 airheads. Made from case hardened cold rolled steel....
$37.00

Add:

FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS

FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS

For all airheads 1970-1995 except R100GS. Used to remove the nut with the four slots that holds the oil seal and the pinion gear in place in the...
$39.00

Add: