Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Final Drive & Driveshaft




Product Image Item Name- Price
FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS

FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS

For all airheads 1970-1995 except R100GS. Used to remove the nut with the four slots that holds the oil seal and the pinion gear in place in the...
$39.00

Add:

/5 & LATER PIN SET - SLOTTED NUT TOOL

/5 & LATER PIN SET - SLOTTED NUT TOOL

If you have or have ordered the /2 final drive slotted nut tool you can just purchase this pin set to allow the tool to work on 1970 and later...
$13.00

Add:

41mm SOCKET for FINAL DRIVE SLOTTED NUT TOOL

41mm SOCKET for FINAL DRIVE SLOTTED NUT TOOL

1/2" drive impact socket for driving the slotted nut tool.
$16.00

Add:

FINAL DRIVE PINION GEAR HOLDER

FINAL DRIVE PINION GEAR HOLDER

Used to keep the pinion gear from rotating while unscrewing the pinion nut. Replaces Matra 256, 507 and BMW 33 1 650.
$34.00

Add:

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

BMW specifies a torque figure for the twelve sided bolts that hold the drive shaft universal joint onto the output flange of the transmission, but a...
$18.00

Add:

DRIVESHAFT COUPLING PULLER 1955-1980

DRIVESHAFT COUPLING PULLER 1955-1980

This removes the piece that couples the drive shaft to the final drive so that you can remove the drive shaft from the swingarm. Replaces Matra 508...
$76.00

Add:

DRIVESHAFT COMPRESSOR - POST 1980

DRIVESHAFT COMPRESSOR - POST 1980

Used to compress the spring on the rubber band drive shafts. BMW started to use them about September of 1980. Replaces BMW tool number 26 1 700. The...
$32.00

Add: