Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Engine




Product Image Item Name- Price
FLYWHEEL HOLDER 1970 on AIRHEADS

FLYWHEEL HOLDER 1970 on AIRHEADS

Keeps the flywheel of all 1970 and later airheads from rotating while loosening or tightening the flywheel bolts. It is the same tool used for the...
$10.00

Add:

GENERATOR/ALTERNATOR/MAGNETO ROTOR PULLER

GENERATOR/ALTERNATOR/MAGNETO ROTOR PULLER

A modified 120mm-long class 10.9 bolt used to remove the generator, magneto or alternator rotor. For all air cooled twins 1951-1995 and R24 R25 R26 &...
$10.00

Add:

PUSHROD TUBE DRIFT I 1951-95 AIRHEADS

PUSHROD TUBE DRIFT I 1951-95 AIRHEADS

DRIFT 1: Replaces Matra 530a, used to remove/install the chromed tubes on the top of the 1951-69 cylinders and I believe also all post 1969 airheads....
$11.00

Add:

PUSHROD TUBE DRIFT II 1951-95 AIRHEADS

PUSHROD TUBE DRIFT II 1951-95 AIRHEADS

DRIFT 2: Replaces BMW 211 (11.1.600) used to push the chromed ring on the pushrod tube against the rubber grommet in the engine block to prevent oil...
$14.00

Add:

DIAL INDICATOR HOLDER TO MEASURE FLYWHEEL RUNOUT and END PLAY

DIAL INDICATOR HOLDER TO MEASURE FLYWHEEL RUNOUT and END PLAY

To minimize engine vibration and prevent premature failure of the transmission input shaft bearing, the runout of the flywheel should be checked, and...
$14.00

Add:

FLUTED KEY SOCKET

FLUTED KEY SOCKET

Used to turn the bolts that hold the connecting rod caps on. For /5 /6 /7. 1/2” socket drive. Replaces BMW tool number 11 2 860
$15.00

Add:

CYLINDER STUD HELICOIL JIG - 1970-1976 AIRHEADS

CYLINDER STUD HELICOIL JIG - 1970-1976 AIRHEADS

To repair your stripped out cylinder stud threads on 1970-1976 airheads with 97mm engine case holes. Made of 1" aluminum tool and jig plate (or...
$225.00

Add:

CYLINDER STUD HELICOIL JIG 1976-1995 AIRHEADS

CYLINDER STUD HELICOIL JIG 1976-1995 AIRHEADS

To repair your stripped out cylinder stud threads on 1976-1995 airheads. Made of 1" aluminum tool and jig plate (or surfaced flat aluminum plate)....
$225.00

Add:

CYLINDER STUD HELICOIL JIG - 1970-1995 AIRHEADS

CYLINDER STUD HELICOIL JIG - 1970-1995 AIRHEADS

To repair your stripped out cylinder stud threads on 1970-1995 airheads. Made of 1" aluminum tool and jig plate (or surfaced flat aluminum plate)....
$260.00

Add:

CYLINDER STUD HELICOIL

CYLINDER STUD HELICOIL

Longer helicoil offered by BMW specifically for repairing cylinder stud threads.
$4.00

Add: