Engine

Displaying 1 to 10 (of 14 products)

1 2 [Next »]

Product Image	Item Name	Price+
	GENERATOR/ALTERNATOR/MAGNETO ROTOR PULLER A modified 120mm-long class 10.9 bolt used to remove the generator, magneto or alternator rotor. For all air cooled twins 1951-1995 and R24 R25 R26 &...	$12.00 Add:
	22 Wrist Pin Bushing 22mm wrist pin bushing machined from C954 aluminum bronze For 1970-1995 airheads	$13.00 Add:
	FLYWHEEL HOLDER 1970 on AIRHEADS Keeps the flywheel of all 1970 and later airheads from rotating while loosening or tightening the flywheel bolts. It is the same tool used for the...	$14.00 Add:
	PUSHROD TUBE DRIFT II 1951-95 AIRHEADS DRIFT 2: Replaces BMW 211 (11.1.600) used to push the chromed ring on the pushrod tube against the rubber grommet in the engine block to prevent oil...	$14.00 Add:
	8mm Exhaust Valve Guide - Bronze Bronze exhaust valve guide for engines using 8mm valves (R68, R69S and all 1970-1995 airheads). These are oversized guides with an outside diameter...	$15.00 Add:
	8mm Exhaust Valve Guide - Cast Iron Cast iron exhaust valve guide for engines using 8mm valves (R68, R69S and all 1970-1995 airheads). These are oversized guides with an outside...	$15.00 Add:
	8mm Intake Valve Guide - Bronze Bronze intake valve guide for engines using 8mm valves (R68, R69S and all 1970-1995 airheads). These are oversized guides with an outside diameter of...	$15.00 Add:
	PUSHROD TUBE DRIFT I 1951-95 AIRHEADS DRIFT 1: Replaces Matra 530a, used to remove/install the chromed tubes on the top of the 1951-69 cylinders and I believe also all post 1969 airheads....	$19.00 Add:
	FLYWHEEL PULLER/HOLDER - 1970 to 1980 AIRHEADS Heavy duty tool for removing all of the "full" flywheels used on airheads from 1970 to 1980. Also holds the flywheel from turning while you loosen or...	$31.00 Add:
	EXHAUST NUT WRENCH - ALL AIRHEADS For exhaust systems with the finned aluminum nut holding the pipe onto the head. It is about 2 x 4.75” (50 x 120mm), compact enough to be carried...	$34.00 Add: