Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Engine




Product Image Item Name Price+
FLYWHEEL HOLDER 1970 on AIRHEADS

FLYWHEEL HOLDER 1970 on AIRHEADS

Keeps the flywheel of all 1970 and later airheads from rotating while loosening or tightening the flywheel bolts. It is the same tool used for the...
$10.00

Add:

GENERATOR/ALTERNATOR/MAGNETO ROTOR PULLER

GENERATOR/ALTERNATOR/MAGNETO ROTOR PULLER

A modified 120mm-long class 10.9 bolt used to remove the generator, magneto or alternator rotor. For all air cooled twins 1951-1995 and R24 R25 R26 &...
$10.00

Add:

PUSHROD TUBE DRIFT I 1951-95 AIRHEADS

PUSHROD TUBE DRIFT I 1951-95 AIRHEADS

DRIFT 1: Replaces Matra 530a, used to remove/install the chromed tubes on the top of the 1951-69 cylinders and I believe also all post 1969 airheads....
$11.00

Add:

DIAL INDICATOR HOLDER TO MEASURE FLYWHEEL RUNOUT and END PLAY

DIAL INDICATOR HOLDER TO MEASURE FLYWHEEL RUNOUT and END PLAY

To minimize engine vibration and prevent premature failure of the transmission input shaft bearing, the runout of the flywheel should be checked, and...
$14.00

Add:

PUSHROD TUBE DRIFT II 1951-95 AIRHEADS

PUSHROD TUBE DRIFT II 1951-95 AIRHEADS

DRIFT 2: Replaces BMW 211 (11.1.600) used to push the chromed ring on the pushrod tube against the rubber grommet in the engine block to prevent oil...
$14.00

Add:

FLUTED KEY SOCKET

FLUTED KEY SOCKET

Used to turn the bolts that hold the connecting rod caps on. For /5 /6 /7. 1/2” socket drive. Replaces BMW tool number 11 2 860
$15.00

Add:

FLYWHEEL PULLER/HOLDER - 1970 to 1980 AIRHEADS

FLYWHEEL PULLER/HOLDER - 1970 to 1980 AIRHEADS

Heavy duty tool for removing all of the "full" flywheels used on airheads from 1970 to 1980. Also holds the flywheel from turning while you loosen or...
$31.00

Add:

EXHAUST NUT WRENCH - ALL AIRHEADS

EXHAUST NUT WRENCH - ALL AIRHEADS

For exhaust systems with the finned aluminum nut holding the pipe onto the head. It is about 2 x 4.75” (50 x 120mm), compact enough to be carried...
$34.00

Add:

REAR MAIN SEAL INSTALLER/PULLER all AIRHEADS 1970-1995

REAR MAIN SEAL INSTALLER/PULLER all AIRHEADS 1970-1995

Used to remove the old engine rear main seal and press in the new one. Replaces BMW tools 111 890, 111 881, 111 880 6061 aluminum with a black...
$43.00

Add:

ENGINE STAND FACEPLATE, AIRHEAD TWINS 1970-1995

ENGINE STAND FACEPLATE, AIRHEAD TWINS 1970-1995

Engine stand faceplate for BMW airhead twin engines, 1970-1995. Laser cut from 1/2" steel, zinc plated.
$90.00

Add: