Shopping Cart
0 item(s) - $0.00

Forks, Shocks, Swingarm & Frame




Product Image Item Name- Price
THREADED MIRROR INSERT

THREADED MIRROR INSERT

Aluminum insert to repair the stripped clutch housing on /5 and some /6 bikes. Inside threads are 10mm x 1.5 left hand (same as your original...
$13.00

Add:

SWINGARM LOCKNUT SOCKET

SWINGARM LOCKNUT SOCKET

There is not enough space for a conventional socket to loosen/tighten the swingarm pivot pin locknut, and the tool provided in the toolkit won’t...
$21.00

Add:

SWINGARM BEARING PULLER - 1955 to 1984

SWINGARM BEARING PULLER - 1955 to 1984

Removes and installs the outer race and stock grease seal of the front (1955-69 Earles) and rear (1955-1984) tapered roller bearings used on all dual...
$43.00

Add:

SWING ARM SEAL - 1970 to 1980

SWING ARM SEAL - 1970 to 1980

Swing arm seal for up to 1980 airheads - ground steel outside diameter so as not to pop out during greasing
$6.00

Add:

STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER

STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER

Pulls the steering head bearing outer race from the frame. Works on virtually all BMW's since 1970 with 320/28 bearing. Split ring is made of steel...
$59.00

Add:

STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS

STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS

For removing the steering head bearing from the triple tree. Bottom piece is machined from a heat treated steel alloy. This is a tough tool made for...
$59.00

Add:

STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS

STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS

Includes both the outer race and inner race steering head bearing pullers, plus everything you need to reinstall the races in the frame and the...
$115.00

Add:

SHOCK COMPRESSOR - /2 /5 /6

SHOCK COMPRESSOR - /2 /5 /6

For disassembling and reassembling the worn shocks on the front of /2 and rear of /5 & /6. Also included is a tool for unscrewing front and rear /2...
$47.00

Add:

PIN SET - FORK TUBE CAP

PIN SET - FORK TUBE CAP

If you purchased the fork tube threaded ring pin wrench you can replace the threaded pins in that tool with these so that you can remove/install the...
$7.00

Add:

PIN SET - /6 /7 FORK THREADED RINGS

PIN SET - /6 /7 FORK THREADED RINGS

If you purchased the fork cap pin wrench you can replace the threaded pins in that tool with these so that you can remove/install the threaded rings...
$7.00

Add: