Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Forks, Shocks, Swingarm & Frame




Product Image Item Name- Price
STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER

STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER

Pulls the steering head bearing outer race from the frame. Works on virtually all BMW's since 1970 with 320/28 bearing. Split ring is made of steel...
$49.00

Add:

STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS

STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS

For removing the steering head bearing from the triple tree. Bottom piece is machined from a heat treated steel alloy. This is a tough tool made for...
$49.00

Add:

STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS

STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS

Includes both the outer race and inner race steering head bearing pullers, plus everything you need to reinstall the races in the frame and the...
$94.00

Add:

FRONT END ALIGNMENT TOOL - PLATE GLASS

FRONT END ALIGNMENT TOOL - PLATE GLASS

Plate used to determine if one tube is cocked in front of the other.
$22.00

Add:

SWINGARM BEARING PULLER - 1955 to 1984

SWINGARM BEARING PULLER - 1955 to 1984

Removes and installs the outer race and stock grease seal of the front (1955-69 Earles) and rear (1955-1984) tapered roller bearings used on all dual...
$39.00

Add:

FORK CAP PIN WRENCH

FORK CAP PIN WRENCH

This tool removes the front fork filler caps on US/2's /5 /6 and /7 and the threaded rings used in the bottom of the /2 and some /5 telescopic forks....
$19.00

Add:

FORK TUBE THREADED RING PIN WRENCH

FORK TUBE THREADED RING PIN WRENCH

Pin wrench that will remove/install the threaded rings in some /5 (the later ones with the smaller diameter pin holes) and all /6 and /7.
$19.00

Add:

PIN SET - /6 /7 FORK THREADED RINGS

PIN SET - /6 /7 FORK THREADED RINGS

If you purchased the fork cap pin wrench you can replace the threaded pins in that tool with these so that you can remove/install the threaded rings...
$7.00

Add:

PIN SET - FORK TUBE CAP

PIN SET - FORK TUBE CAP

If you purchased the fork tube threaded ring pin wrench you can replace the threaded pins in that tool with these so that you can remove/install the...
$7.00

Add:

SWINGARM LOCKNUT SOCKET

SWINGARM LOCKNUT SOCKET

There is not enough space for a conventional socket to loosen/tighten the swingarm pivot pin locknut, and the tool provided in the toolkit won’t...
$18.00

Add: