Shopping Cart
0 item(s) - $0.00

Final Drive & Driveshaft




Product Image Item Name- Price
FINAL DRIVE SLOTTED NUT TOOL - /2 (1955 to 1969)

FINAL DRIVE SLOTTED NUT TOOL - /2 (1955 to 1969)

For /2's 1955-1969 and R66 R51/2 R51/3 R67 R68 but not R26 R27 Used to remove the nut with the four slots that holds the oil seal and the pinion gear...
$39.00

Add:

/2 PIN SET - FINAL DRIVE SLOTTED NUT TOOL

/2 PIN SET - FINAL DRIVE SLOTTED NUT TOOL

This pin set will allow the /5 & later slotted nut tool to be used on 1955-1969 /2's. The /2 slotted nut tool comes with this pin set so if you've...
$13.00

Add:

FINAL DRIVE PINION GEAR HOLDER

FINAL DRIVE PINION GEAR HOLDER

Used to keep the pinion gear from rotating while unscrewing the pinion nut. For 1955 to 1995 airheads. Made from case hardened cold rolled steel....
$37.00

Add:

41mm SOCKET FOR SLOTTED NUT TOOL

41mm SOCKET FOR SLOTTED NUT TOOL

1/2" drive impact socket for driving the slotted nut tool.
$34.00

Add:

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR

BMW specifies a torque figure for the twelve sided bolts that hold the drive shaft universal joint onto the output flange of the transmission, but a...
$18.00

Add:

DRIVESHAFT COUPLING PULLER 1955-1980

DRIVESHAFT COUPLING PULLER 1955-1980

This removes the piece that couples the drive shaft to the final drive so that you can remove the drive shaft from the swingarm. Replaces Matra 508...
$84.00

Add: