Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Forks, Shocks, Swingarm & Frame




Product Image Item Name- Price
FRONT END ALIGNMENT TOOL - PLATE GLASS

FRONT END ALIGNMENT TOOL - PLATE GLASS

Plate used to determine if one tube is cocked in front of the other.
$22.00

Add:

SWINGARM BEARING PULLER - 1955 to 1984

SWINGARM BEARING PULLER - 1955 to 1984

Removes and installs the outer race and stock grease seal of the front (1955-69 Earles) and rear (1955-1984) tapered roller bearings used on all dual...
$39.00

Add:

DIAL INDICATOR

DIAL INDICATOR

Used with the crankshaft truing stand, The flywheel runout fixture, and the front end alignment tools. 0.0005” resolution, 1-inch range
$32.00

Add:

SWING ARM & TELESCOPIC FORK PIN WRENCH

SWING ARM & TELESCOPIC FORK PIN WRENCH

This tool adjusts the rear swingarm pivot pins on /2’s (replaces Matra 513). It will also remove the front fork filler caps on US/2's /5 /6 and /7...
$19.00

Add:

SWINGARM LOCKNUT SOCKET

SWINGARM LOCKNUT SOCKET

There is not enough space for a conventional socket to loosen/tighten the swingarm pivot pin locknut, and the tool provided in the toolkit won’t...
$18.00

Add:

SHOCK COMPRESSOR - /2 /5 /6

SHOCK COMPRESSOR - /2 /5 /6

For disassembling and reassembling the worn shocks on the front of /2 and rear of /5 & /6. Also included is a tool for unscrewing front and rear /2...
$47.00

Add:

LEFT HAND TAP FOR MIRROR INSERT, 7/16-20

LEFT HAND TAP FOR MIRROR INSERT, 7/16-20

7/16-20 left hand tap used in conjunction with our mirror inserts to repair the stripped threads on your /2
$18.00

Add:

/2 THREADED MIRROR INSERT

/2 THREADED MIRROR INSERT

Aluminum insert to repair your stripped clutch housing. Inside threads are 8mm x 1 left hand (same as your original threads), outside threads are...
$13.00

Add: