Wheels

Displaying 1 to 10 (of 11 products)

1 2 [Next »]

Product Image	Item Name	Price+
	WHEEL BEARING SHIM - 1955 to 1969 TWINS 0.05mm wheel bearing adjusting shim for /2 twins	$1.50 Add:
	WHEEL BEARING SHIM - R26 & R27 0.05mm wheel bearing adjusting shim for R26 & R27	$1.50 Add:
	/2 & URAL PIN SET FOR HUB NUT REMOVER If you purchased a hub nut wrench for a pre-/2 (or a /6 /7) you can unscrew the pins that came with the tool and install these to allow the tool to...	$15.00 Add:
	WHEEL TUBE /2 and /5 Tube to aid in removing the wheel bearings, and to pre-load them while checking for correct spacer length. Shown in picture #169 in my copy of the /2...	$15.00 Add:
	PRE /2 and R26/R27 PIN SET FOR HUB NUT REMOVER If you purchased a /2 hub nut remover (or the /6 /7 version) you can replace the threaded pins in that tool with these to allow the tool to be used...	$18.00 Add:
	WHEEL BEARING ADJUSTING KIT - 1955-1969 TWINS Includes all the pieces necessary to set the bearing preload on one wheel.	$20.00 Add:
	WHEEL BEARING GREASER - 1955 to 1969 To grease the tapered wheel bearings (bearing # 30204) used in /2 motorcycles without removing them from the wheel.	$24.00 Add:
	WHEEL BEARING ADJUSTING KIT for R26 R27 Wheel bearing adjusting kit for R26 & R27. Includes enough pieces to properly adjust the preload of one wheel.	$25.00 Add:
	HUB NUT REMOVER /2 and also URAL Pin wrench that will remove the hub nut from any /2 and some Urals (those with a diagonal pin spacing of 46mm) to allow re-greasing of the wheel...	$48.00 Add:
	HUB NUT REMOVER - PRE /2 Pin wrench that will remove the hub nut from pre-/2 motorcycles (R51/3 for example) to allow re-greasing of the wheel bearings. It's designed to work...	$51.00 Add: