Shopping Cart
0 item(s) - $0.00
CycleWorks Banner 5

Wheels




Product Image Item Name- Price
HUB NUT REMOVER /2 and also URAL

HUB NUT REMOVER /2 and also URAL

Pin wrench that will remove the hub nut from any /2 and some Urals (those with a diagonal pin spacing of 46mm) to allow regreasing of the wheel...
$46.00

Add:

HUB NUT REMOVER - PRE /2

HUB NUT REMOVER - PRE /2

Pin wrench that will remove the hub nut from pre-/2 motorcycles (R51/3 for example) to allow regreasing of the wheel bearings. It's designed to work...
$46.00

Add:

HUB NUT REMOVER - SINGLE CYLINDER BIKES

HUB NUT REMOVER - SINGLE CYLINDER BIKES

Pin wrench that will remove the hub nut from any single cylinder bike, R24 thru R27. It's designed to work even when some bozo has gouged those four...
$46.00

Add:

/2 & URAL PIN SET FOR HUB NUT REMOVER

/2 & URAL PIN SET FOR HUB NUT REMOVER

If you purchased a hub nut wrench for a pre-/2 (or a /6 /7) you can unscrew the pins that came with the tool and install these to allow the tool to...
$13.00

Add:

PRE /2 PIN SET FOR HUB NUT REMOVER

PRE /2 PIN SET FOR HUB NUT REMOVER

If you purchased a /2 hub nut remover (or the /6 /7 version) you can replace the threaded pins in that tool with these to allow the tool to be used...
$13.00

Add:

WHEEL BEARING ADJUSTING KIT - 1955-1969 TWINS

WHEEL BEARING ADJUSTING KIT - 1955-1969 TWINS

Includes all the pieces necessary to set the bearing preload on one wheel.
$15.00

Add:

WHEEL BEARING SHIM - 1955 to 1969 TWINS

WHEEL BEARING SHIM - 1955 to 1969 TWINS

0.05mm wheel bearing adjusting shim for /2 twins
$1.50

Add:

WHEEL TUBE /2 and /5

WHEEL TUBE /2 and /5

Tube to aid in removing the wheel bearings, and to pre-load them while checking for correct spacer length. Shown in picture #169 in my copy of the /2...
$9.00

Add:

WHEEL BEARING GREASER - 1955 to 1969

WHEEL BEARING GREASER - 1955 to 1969

To grease the tapered wheel bearings (bearing # 30204) used in /2 motorcycles without removing them from the wheel.
$24.00

Add: